Oximeter adapter

Product advantages Enables the use of the oximeter probe with ESAO®.

Full description Usable with the ESAO® 4 + interface, this adapter enables you to fully benefit from its performances : automatic air / water changeover switching, use of 3 or 4 adapters to simultaneously measure O₂, CO₂, temperature, ethanol...
Software or manual changeover switching of the environment depending on the software used.
Pilot lamps continuously indicate the current state of the adapter.

Choice of the measurement environment
Air: measurement of the oxygen concentration in the air from 0 to 25 %.
Water: measurement of the dissolved oxygen concentration from 0 to 20 mg / L.

Calibration
A zero potentiometer. A slope potentiometer.

Characteristics Specifications:

• Response time: about 5 s.
• Accuracy (after calibration): 0.1 % of full scale.
• Operating temperature: 0 to 40 °C.
• Casing-built-in lead with plug for connection to the oximeter probe.

Supplied with instruction manual.